Samsung SFT-503 - Manual (Page 26)

Please contact the installer of your satellite dish if
you do not know the correct setting value of each
parameter listed in the above table.
Search Mode
L.O. Freq.(MHz)
LNB Power
22KHz
OV/12V Antenna
Switch
Tone Burst
Scramble
Auto / Manual / NIT
You can select the predefined L.O Frequency by pressing
Left/Right keys or manually enter a specific frequency in
MHz unit by pressing numeric buttons.
Depending on the user's antenna LNB, you can supply either
LNB power by setting "ON" or not by setting "OFF".
Depending on the user's antenna switch box or LNB, you can
supply either 22KHz by setting "ON" or not by setting "OFF".
Depending on the user's antenna switch box, you can pick up
either 12V by Setting "ON" or 0V by setting "OFF".
Depending on the user's antenna switch box, you can select
one of "SA", "SB" and "OFF".
NO/OFF, if it set "ON", all channel can be scan including
scrambled channel.
3. Rename Satellite
= = Use the Red buttons to select the satellite that you
want to change the name of a satellite
from the satellite list and press F1 button.
= = Use the and buttons to key in the
new satellite name.
The F1 button: save the new satellite name,
The F2 button: display the other charaster list.
The F3 button: erase the character currently selected.
N N O O T T E E : The maximum length of the satellite name
is allowed up to 14 characters.
Press F1 in the Channel Search to
change the name of satellite.
You can directly input the number by yourself pushing the numeric buttons in the Remote
Control Unit.
2. Channel Search
General Information
21
user's 4/9/01 3:24 PM Page 26