Samsung SFT-503 - Manual (Page 28)

Menu Operation
= = Select the Manual Search Mode from "Search Mode" field using the button.
= = Press the button .
= = If you cannot find the desired transponder from the transponder list, you can add it by inputting
appropriate parameter values for a new transponder in the corresponding item of numeric
number field.
= = When you want to change the parameter of an existing transponder, select the parameter
using the volume button( ) and change its value.
(Frequency, Symbol Rate, FEC, Polarity)
= = Press the button to start the manual searching for the selected transponder.
= = You can also search a channel of the specified transponder by specifying Video PID,
Audio PID and PCR PID.
= = Enter PIDs of Video, Audio and PCR ( the value is decimal )
= = Press the button.
= = Then the result will be save the data.
= = Press the button to return to the previous menu. Press the button to exit this menu
and return to the viewing mode.
= = Press F1 to delete all TPs one by one except the first TP and the last TP(add TP) of the current
satellite.
5. Manual Channel Search
It will be more convenient to use "Manual Channel Search" procedure when you want to search
channel for a specified transponder offered from the satellite. As in Automatic Channel Search,
Manual Channel Search also searches all channels broadcasted over a specific
transponder using its predefined information. You can add a new transponder if you cannot
find it on the predefined transponder list.
= = Select "Channel Search" in "Installation Menu"and the following screen will be displayed.
23
user's 4/9/01 3:24 PM Page 28