Samsung SFT-503 - Manual (Page 31)

Menu Operation
9. Change PIN Code
You can change your PIN code from factory default value "0000" as follows: Select "Change
PIN Code" in the "Installation" menu.
= = Then you will be asked for a new PIN Code. Once you enter a new PIN Code, the system
will ask you to enter it again to confirm.
= = After you enter a new PIN Code twice, the PIN Code has been changed. If you forgot
the PIN Code, you have to contact the distributor to recover it.
10. Factory Reset
All data you are using will be deleted and the default data will be loaded.
= = If you select “Factory Reset”, it asks your confirmation.
= = If you press “RED” button, then all data will be replace by factory setting.
= = If you don’t want to reset, press “Menu” or “Exit” to exit this menu.
11. Delete Whole Channel
The whole channel data of satellite will be deleted.
= = If you select “Delete whole channel”, it asks your confirmation.
= = If you press “RED” button, then all channel data of satellite will be deleted.
= = If you don’t want to delete, press “Menu” or “Exit” to exit this menu.
26
user's 4/9/01 3:24 PM Page 31