Samsung HL-S6166W - Manual (Page 54)

English - 54
Channel Control
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below the channel number.
1 Press the CH or CH button to tune to the channel that
will be labeled.
2 Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
Press the … or † button to
select “Name”, then press
the ENTER button.
3 Press the … or † button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the … or † button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +, -,
✽, /, blank).
4 Press the √ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing … or † button, as
above.
Repeat the process to select
the last three digits.
Press the ENTER button.
After all settings are completed, select “OK” using the √ button.
Press the ENTER button to save the settings and return to the
previous menu.
To erase the assigned new name, select “Clear” by pressing
the œ or √ button, then press the ENTER button.
Press the EXIT button to exit.
NOTE
• If you add or delete a TV channel, the channel label (if set) will
also be added or deleted.
Channel
Antenna : Air √
Auto Program √
Channel Manager √
Name √
Fine Tune √
Signal Strength √
LNA : On √
Move Enter Return
Name
Move Adjust Return
Air 2 A
Air 3 - - - - -
Air 4 - - - - -
Air 5 -----
Air 6 -----
▲
▼
▼
OK Clear
Clear
Clear
Clear
Clear
Name
Move Adjust Return
Air 2 CNN02
Air 3 - - - - -
Air 4 - - - - -
Air 5 -----
Air 6 -----
▼
OK Clear
Clear
Clear
Clear
Clear
▲
▼
BP68-00586D-01Eng(048~059) 3/16/06 4:21 PM Page 54