Step 2: connecting the audio cords, Select a connection – Sony DVP-NS405 User Manual
Page 20
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
TV
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
MD deck/DAT deck
AV amplifier (receiver) with a Dolby
*
Surround (Pro Logic)
decoder
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
or
• 6 speakers
(front L and R, centre, rear L and R, subwoofer)
AV amplifier (receiver) having a Dolby Digital, MPEG audio, or
DTS
**
decoder and a digital input jack
• 6 speakers
(front L and R, centre, rear L and R, subwoofer)
A
D
A
B
B
C
D