Sony DVP-NS405 - Manual (Page 45)

45
Sou
nd Adj
u
st
m
e
n
ts
• LFE (Low Frequency Effect) signal
Note
If “DTS” is set to “OFF” in “AUDIO SETUP,” the
DTS track selection option will not appear on the
screen even if the disc contains DTS tracks (page
63).
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
This function is designed to work with the
LINE OUT L/R (AUDIO) and LINE (RGB)-
TV jacks.
Note that if you select one of the TVS
settings, the player does not output the
following signals from the DIGITAL OUT
(OPTICAL or COAXIAL) jack.
• Dolby Digital signals (when you set
“DOLBY DIGITAL” in “AUDIO SETUP”
to “D-PCM”) (page 63)
• MPEG audio signals
1
Press DISPLAY twice during
playback.
The following Control Bar appears.
SUR
DISPLAY
ENTER
DVP-NS305 DVP-NS310/405/410
, continued