Samsung HT-DB390 - Manual (Page 68)

67
Operating a TV with the Remote Control
• The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
When operating a TV with the remote control
1
Press the MODE button to make the TV
indicator on the remote control flash.
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
• You can use the TV POWER, TV VIDEO, VOLUME, CHANNEL,
and Numeric buttons (0~9).
5
Point the remote control toward the TV and
press POWER. If the TV turns off or on, the
setting is complete.
Note
39P~74P(DB390)-SEA 2004.9.15 2:18 PM Page 68