Symbol Technologies MC9000-K - Manual (Page 152)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 3-60
Reader Parameters
Use the Reader Parameters window to set the scanning read parameters.
1. Double-tap the Ctl Panel icon - double-tap Scanner Settings - double-tap Reader
Parameters. The Reader Parameters window appears.
Figure 3-57. Reader Parameters Window
2. To change any item in the Reader Parameters column, use the up and down arrows
to select the item.
3. Use the left and right arrow buttons to increment the value. Table 3-8 list the
Reader Parameter value options.
Table 3-8. Reader Parameters
Reader Parameters Values
Reader Type Laser
Aim Type Trigger, Timed hold, Timed Release
Aim Duration 0-60,000 in increments of 100
Aim Mode Dot, Slab, Reticle, None
Beam Width Normal, Narrow
Raster Mode Smart, Cyclone, None, Always Open,
Beam Timer 0-60,000 in increments of 100
Control LED False, True
LED Level High, Low