Symbol Technologies MC9000-K - Manual (Page 343)

Mobile Computer Configuration 10-7
Defining Script Properties
Before a script is created, the script properties must be defined. This defines the type of terminal,
flash type, number of disks being created and the memory configuration of each disk partition.
To define the script properties:
1. Select the Script window to make it active.
2. Click the Properties button. The Script Properties window - Partition Data tab appears.
Figure 10-2. Script Properties Window - Partition Data Tab
3. In the Terminal drop-down list, the MC9000w v1.0 64M entry is already selected.
4. Use the default Flash Type.
5. In the Disks drop-down list, select the number of disk partitions to create.
6. Select the (memory) Size for each partition. Note that adding space to one disk. partition
subtracts it from another.
7. In the Access drop-down list for each disk partition, determine and select the Read/Write
access option.