Symbol Technologies MC9000-K - Manual (Page 171)

Communications 4-13
USB Connection Setup
1. The USB communications setup can be used to set up to communicate with a Single Slot
Serial/USB Cradle, MSR or a CAM.
2. On the mobile computer double-tap the Ctl Panel icon and double-tap Comm Settings to
enter the Comm Settings, window.
Figure 4-11. Comm Settings Window
3. Confirm that the Comm port default value is set to USB. If it is not set to USB then with Port
highlighted, use the left
and right arrow buttons to set the value to USB.
4. Tap OK to exit the Comm Settings window and tap Exit to exit the Control Panel window.
5. Ensure that ActiveSync was installed on the host computer and a partnership was created.
See
Installing ActiveSync on page 4-3 and Setting up a Partnership on page 4-4 .