Symbol Technologies MC9000-K - Manual (Page 198)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 5-8
Codes Window
The Codes window is used to set the scan type parameter.
• Tap Param to select the code types, tap in the box to select a code type.
• To set parameters for a code type, tap the code type to highlight it and then tap Param to
display the Code Parameters Sample Window, see
Figure 5-4 . Different code types will have
parameter settings specific to that code type, so the windows will differ.
• To set length for a code type, tap the code type to highlight it and then tap Length to display
the code length sample window, see
Figure 5-4 . Different code types will have length
settings specific to that code type, so the setting windows will differ.
Figure 5-4. ScanSamp2 Examples
Codes Window Code Parameters Sample Window Code Length Sample Window