Chapter descriptions – Symbol Technologies MC9000-K User Manual
Page 22
MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide
xx
Chapter Descriptions
Topics covered in this guide are as follows:
•
describes the mobile computer’s physical characteristics,
explains how to install and charge the batteries, explains how to replace the strap lanyard,
and explains how to start the mobile computer for the first time.
•
Chapter 2, Operating the MC9000-K/S
explains how to use the mobile computer. This
includes instructions for powering on and resetting the mobile computer, entering and
scanning.
•
explains how to adjust settings on the mobile computer.
•
®
ActiveSync™ for
communications between the mobile computer and host computer.
•
explains how to use the installed applications.
•
Chapter 6, Spectrum24 Network Configuration
explains how to configure the Spectrum24
wireless connection.
•
describes the mobile computer accessories, including setup and
configuration.
•
Chapter 8, Software Installation
provides an overview of the Software Mobility Developer’s
Kit (SMDK) installation and its uses.
•
explains how to set up the mobile computer to synchronize with
a server using the AirBEAM Smart Client and AirBEAM Staging applications.
•
Chapter 10, Mobile Computer Configuration
describes how to use the Terminal
Configuration Manager (TCM) and describes how to use the Initial Program Loader (IPL).
•
provides instructions for installing the desktop emulator on
the host computer and using the desktop emulator as an aid in developing applications.
•
Chapter 12, Maintenance and Troubleshooting
provides information on proper mobile
computer maintenance and troubleshooting.
•
Appendix A, Technical Specifications
includes the technical specifications and connector pin
outs for the mobile computer.
•
provides the keypad mapping information for the mobile
computer.