Symbol Technologies MC9000-K - Manual (Page 315)

Accessories 7-59
Wall Mounting Bracket and Shelf Slide
This section describes how to install and set up the MC9000 Wall Mount Bracket and Shelf Slide to
mount cradles to a wall.
Figure 7-42. Wall Mounting Bracket with Shelf Slide
When installed on a wall, the mounting bracket and shelf slide enable mounting one or two single
slot cradles to a wall. Use two brackets to mount a four slot cradle.
Installing the Wall Mount Bracket
To install the wall mount bracket for use with one or two single slot cradles or four slot chargers,
place the smaller surface of the bracket against the wall or vertical support structure, and secure with
four 1/4” screws (use two of the three screw holes in each row).
Figure 7-43. Wall Mounting Bracket Mounting Screws
If using the bracket and slide with a four slot cradle, secure a second bracket to the wall next to the
first, aligning the horizontal screw holes on the second with those of the first.
Wall Mounting
Bracket
Shelf Slides
Mounting two single slot cradles Mounting one single slot cradle
Insert screws
Insert screws