Samsung Laser MFP SCX-4100 - Manual (Page 65)

P
RINTING
3.8
Setting Graphic Properties
Use the following graphic options to adjust the print quality for
your specific printing needs. See page 3.2 for more information
about accessing printer properties.
Click the Graphics tab to display the properties shown below.
Source
Make sure that Source is set to the
corresponding paper tray.
Use the Manual Feed source when printing to
special material. You need to load one sheet at
a time into the manual feeder. See page 2.9.
If the paper source is set to Auto Select, the
machine automatically picks up print material in
the following order: the manual feeder and the
paper tray.
Type
Make sure that Type is set to Printer
Default. If you load a different type of print
material, select the corresponding paper type.
For more information about print materials, see
Chapter 2, Paper Handling.
If you use cotton paper, set the paper type to
Thick for the best printing.
To use recycled paper, which weighs from 75g/
m
2 to 90g/m 2 (20lb to 24lb), or colored paper,
select Color Paper.
Property Description
3
4
1
3
2