Sharp MD-MT88H User Manual

Page 15

Advertising
background image

01/4/4 88UK_3.fm

15

Ba

si

c O

p

er

at

ion

-Rec

or

ding-

To prevent recorded MiniDiscs from
being erased accidentally

Slide the accidental erase prevention tab, located on the
side of the MiniDisc, in the direction indicated by the
arrow.
The MiniDisc will then be protected against accidental
erasure.

To add a recording to such a MiniDisc, slide the acciden-
tal erase prevention tab back to its original position.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure
to note the following. If the label is not attached properly,
the MiniDisc may jam inside the unit and it may not be
possible to remove it.

About sampling rate converter

This portable MD incorporates a sampling rate converter
meaning it can record from digital radios or DAT tape
recorders.

Note for digital recording

You cannot copy a MiniDisc that you recorded from digital
inputs to another MiniDisc or DAT. It is prevented by the
SCMS (Serial Copy Management System). Recording
from analogue inputs is not affected.

z

If the label peels off or partially lifts
away, replace it with a new one.

z

Do not put a new label on top of an ex-
isting one.

z

Attach the label only in the specified
location.

Digital signals

Digitally recorded
MiniDisc

Cannot record

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Advertising