Sony DPF-C1000 - Manual (Page 2)

Viewing index display
A list in thumbnails of the images stored in memory card is displayed.

 A thumbnail means a small image for review registered for an image file taken by a digital camera.
1 Press [MENU].
2 Press / to select (Index) then press [ENTER].
To display a single image (single view)
Press / to select the desired image on the index display then press [ENTER]. The selected single view image
is displayed.
The slideshow begins once you press [ENTER] during display of a single view image.
Changing the menu settings
1 Press [MENU].
2 Press / to select (Settings) then press [ENTER].
3 Change the settings, using / and [ENTER], referring to
“Overview of the menu items”.
4 Press [MENU] to close the menu.

 To return to the previous display, select at lower right then press [ENTER].
Overview of the menu items
Slideshow
settings
Photo Interval
Switches images at a short interval (approximately 10 seconds).
Switches images at a moderate interval (approximately 30 seconds).
Switches images at a long interval (approximately 60 seconds).
Display mode
Displays an entire image on the screen. (Some image may be displayed with black
margins at the top, bottom, left and right.)
Displays an image on the entire screen by partially trimming the borders without
changing the aspect ratio.
Effect
Center cross: Transitions to the next image as though the previous image were being
pushed from the center to the four corners.
Blind (vertically): Transitions to the next image as though blinds were being lowered
vertically.
Blind (holizontally): Transitions to the next image as though blinds were being pulled
horizontally.
Fade: Transitions to the next image by fading the current image out and fading the next
image in.
Wipe: Transitions to the next image as though the current image were being wiped off
the screen to reveal the next image.
Random: Switching images by using the above five effects randomly.
Date/Time
settings
Sets the date. Select at lower on the display then press [ENTER].
Sets the time. Select at lower on the display then press [ENTER].
LCD brightness
settings
Adjusts the brightness to dimmer.
Adjusts the brightness to a moderate level.
Adjusts the brightness to brighter. The display becomes brightest.
Timer settings
You can select either of two types for the timer.
For details, see “To set the timer”.
Demonstration
mode setting
Activates demonstration display while no memory card is inserted.
Activates clock display while no memory card is inserted.
Initialize
setting
Deletes all settings and return to the factory-set status.
Returns to the menu display without initializing.
To set the timer
1 Press [MENU], select (Settings) with / then press [ENTER].
2 Select (Timer settings) with / then press [ENTER].
3 Select a timer to be set with / then press [ENTER].
: The power is automatically turned off after the interval you have selected for this has passed with no
operation (Auto OFF setting).
: Turn on or off the power at the specified time (Auto power ON/OFF setting).
4 Set the time to activate the timer.
Auto OFF setting
 Press / to select a time then press [ENTER].
: The power is turned off after 4 hours.
: The power is turned off after 2 hours.
: The Auto OFF setting is not active.
 Press  to select at the bottom then press [ENTER].
Auto power ON/OFF setting
 To turn on the power automatically at a specified time, press  to select
then press [ENTER].
If you do not wish to set it, proceed to step .
 Set the time when the power is to be turned on.
Press  to select the hour or minute then press [ENTER]. Press / to
change the number then press [ENTER] to register it.
 To turn off the power automatically at a specified time, press  to select then press [ENTER].
If you do not want to set it, proceed to step .
 Set the time when the power is to be turned off.
Press  to select the hour or minute then press [ENTER]. Press / to
change the number then press [ENTER] to fix it.
 Press  to select at the bottom then press [ENTER].
5 Press [MENU] to complete.

 The Auto OFF setting and Auto power ON/OFF setting cannot be set at the same time. The latter setting takes precedence.
Exchanging a panel (DPF-C70E only)
You can exchange the original panel with the supplied exchangeable panel.
1 Insert a long, thin object such as a pin into the hole at the lower right on the rear of the photo
frame and lift up the front panel.
2 Remove the panel.
3 Align the claw of the exchangeable panel with the hole of the photo frame then tuck the
exchangeable panel in.
4 Press the four corners of the exchangeable panel to snap it in place on the photo frame.
Additional information
Troubleshooting
Before submitting the photo frame for repair, try using the following guidance to solve the problem.
If the problem persists, consult with your Sony dealer or Sony service facilities.
The power is not turned on.
 Is the AC power plug inserted correctly?
 Insert the power plug properly.
Nothing happens even if you operate the photo frame.
 Turn off the power and turn it on again.
No images are displayed on the screen.
 Is a memory card inserted properly?
 Insert a memory card properly.
 Does the memory card contain images saved with a digital camera or other device?
 Insert a memory card containing images.
 Check the file formats that can be displayed. (See “Specifications”.)
 Is the file format compatible with DCF?
 A file that is not compatible with DCF may not be displayed with the photo frame, even if it can be displayed with a
computer.
Some images are not displayed.
 Are the images displayed in the index view?
 If the image is displayed in the index view but cannot be displayed as single image, the image file may be damaged even
though its thumbnail preview data is fine.
 A file that is not compatible with DCF may not be displayed with the photo frame, even if it can be displayed with a
computer.
 If you named or renamed the file on your computer and the file name includes characters other than alphanumeric
characters, the image may not be displayed on the photo frame.
 Is there a folder with more than 8 levels in its hierarchy on the memory card?
 The photo frame cannot display images saved in a folder that is more than 8th hierarchy.
A vertical image is displayed in horizontally orientation.
 An image shot with a digital camera that does not support the Exif rotate tag when recorded in vertical orientation, is
displayed in horizontally orientaion.
If an error icon appears
If an error occurs, one of the following icons may be displayed on the LCD screen of the photo frame. Follow the
corresponding solution below to solve the problem.
Icon Meaning/Solutions
This is a JPEG file created on your computer or the file in a format that is not supported by the
photo frame.
This is a file in a format that is supported by the photo frame. But its thumbnail data for review or
the image itself cannot be accessed.
No data are recorded in the “Memory stick Duo”, SD memory card or USB memory.
The “Memory Stick Duo”, SD memory card or USB memory is damaged and inoperable.
 Use a normal “Memory Stick Duo”, SD memory card or USB memory.
A “Memory Stick Duo”, SD memory card or USB memory that is not supported by the photo frame
is being used.
 Use a “Memory Stick Duo”, SD memory card or USB memory that is supported by the photo
frame.
Specifications
Photo frame
Model name DPF-C1000 DPF-C800 DPF-C700 DPF-C70A DPF-C70E
LCD screen LCD panel 26 cm/
10.1-inches,
TFT active
matrix
20.3 cm/
8-inches, TFT
active matrix
18 cm/7-inches,
TFT active
matrix
18 cm/7-inches, TFT active matrix
Total number of
dots
1,843,200 dots
(1,024 × 3 (RGB)
× 600 dots)
1,440,000 dots
(800 ×3 (RGB)
× 600 dots)
1,152,000 dots
(800 × 3 (RGB)
× 480 dots)
336,960 dots
(480 × 3 (RGB) ×234 dots)
Effective display area Display aspect
ratio
16:10 4:3 16:10 16:10
Actual viewable
size
23.4 cm/9.2-
inches
20.1 cm/7.9-
inches
16.2 cm/6.4-
inches
16.1 cm/6.4-inches
Total number of
dots
1,628,748 dots
(914 × 3 (RGB)
× 594 dots)
1,411,344 dots
(792 × 3 (RGB)
× 594 dots)
1,012,464 dots
(712 × 3 (RGB)
× 474 dots)
293,940 dots
(426 × 3 (RGB) × 230 dots)
LCD backlight life 20,000 hours (before brightness of the backlight is reduced to half)
Input/Output connectors USB connector (A TYPE, Hi-Speed USB)
“Memory Stick PRO” (Duo)/SD memory card slots
Compatible file formats *1 JPEG DCF 2.0 compatible, Exif 2.3 compatible, JFIF(Baseline JPEG with 4:4:4, 4:2:2 or 4:2:0
format)
TIFF Exif 2.3 compatible
BMP 1, 4, 8, 16, 24, 32 bit Windows format
RAW *2 SRF, SR2, ARW 2.2(preview only)
Maximum picture elements *3 8,000 × 6,000
File system FAT12/16/32
Image file name DCF format, 256 characters within 8th hierarchy
Maximum number of files that can be handled 4,999 files
Power requirements
DC IN jack, DC 5V
Power
consumption
With
the AC
adaptor
At the maximum
load
9.5 W 9.0 W 8.5 W 3.6 W
Normal mode 6.2 W 5.8 W 5.4 W 3.6 W
Without
the AC
adaptor
At the maximum
load
7.5 W 7.0 W 6.5 W 3.0 W
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Dimensions
(width/height/depth)
With the stand
spread out
Approx. 262.1
mm × 180.6
mm × 61.6 mm
(10 3/8 inches
× 7 1/8 inches ×
2 1/2 inches)
Approx. 218.4
mm × 172.4
mm × 61.6 mm
(8 5/8 inches ×
6 7/8 inches ×
2 1/2 inches)
Approx. 188.8
mm × 132.4
mm × 61.6 mm
(7 1/2 inches ×
5 1/4 inches ×
2 1/2 inches)
Approx. 188.8
mm × 132.4
mm × 61.6 mm
(7 1/2 inches ×
5 1/4 inches ×
2 1/2 inches)
Approx. 188.8
mm × 132.4
mm × 62.4 mm
(7 1/2 inches ×
5 1/4 inches ×
2 1/2 inches)
When hanging on
the wall
Approx. 262.1
mm × 180.6
mm × 27.3 mm
(10 3/8 inches
× 7 1/8 inches ×
1 1/8 inches)
Approx. 218.4
mm × 172.4
mm × 27.3 mm
(8 5/8 inches ×
6 7/8 inches ×
1 1/8 inches)
Approx. 188.8
mm × 132.4
mm × 27.3 mm
(7 1/2 inches ×
5 1/4 inches ×
1 1/8 inches)
Approx. 188.8
mm × 132.4
mm × 27.3 mm
(7 1/2 inches ×
5 1/4 inches ×
1 1/8 inches)
Approx. 188.8
mm × 132.4
mm × 28.5 mm
(7 1/2 inches ×
5 1/4 inches ×
1 1/8 inches)
Mass Approx. 515 g
(1 lb 2 1/8 oz)
Approx. 449 g
(15 7/8 oz)
Approx. 283 g
(10 oz)
Approx. 304 g
(10 3/4 oz)
Approx. 317 g
(11 1/8 oz)
Included accessories Refer to “Checking the included items” on the front side.
AC adaptor
Model name AC-P5022
Power requirements AC100 V - 240 V, 50 Hz/60 Hz, 0.4 A
Rated output voltage DC 5 V, 2.2 A
Dimensions (width/height/depth) Approx. 79 mm × 34 mm × 65 mm
(3 1/8 inches × 1 3/8 inches × 2 5/8 inches)
(excluding the protruding parts)
Mass Approx. 105 g (3 3/4 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change without notice.
* 1 Some of the files may not be compatible depending on the type of data.
* 2 RAW files of a Sony α camera are displayed as thumbnail preview.
* 3 17 × 17 or more are required. An image with an aspect ratio of 20:1 or more may not be displayed properly. Even if the aspect ratio is less than 20:1,
display problem may occur in thumbnails, slideshow or other occasitions.
On trademarks and License
 , Cyber-shot, , “Memory Stick”, and are trademarks or registered trademarks of Sony
Corporation.
 SD Logo, SDHC Logo are trademarks of SD-3C, LLC.
 All other companies and product names mentioned herein may be the trademarks or registered trademarks of
their respective companies. Furthermore, ™ and ® are not mentioned in each case in this manual.
 Libtiff
Copyright © 1988 - 1997 Sam Leffler
Copyright © 1991 - 1997 Silicon Graphics, Inc.
 2011 Sony Corporation Printed in China
Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink.
Customer support home page
The latest support information is available at the following home page address:
http://www.sony.net/