Sony BDV-T10 - Manual (Page 85)

Se
ttings
and
Adjus
tme
nts
85 US
You can use the following buttons to enter
characters.
[Easy Setup]
You can recall the Easy Setup to make the basic
settings.
1
Press C/c to select [Start], then press
.
2
Follow the instructions for “Step 3:
Performing the Easy Setup” (page 29)
from step 4.
Buttons Details
RED
[Letter Type] Switches the keyboard between
alphabet and numbers.
GREEN
[A/a] Switches the keyboard between
upper case and lower case.
BLUE
[Symbol] Displays the keyboard for
symbols.
YELLOW
[Finish] The input is entered, and the
system returns to the previous
display.
CLEAR
[Clear]/[Clear All] Erases the character to the right
of the cursor.
To erase all displayed characters,
press and hold CLEAR for 2
seconds or more.
RETURN
[Cancel] Returns to the previous display,
canceling the input.
C/X/x/c, • Select an input function using
C/X/x/c, and press .
• Enter characters as follows:
1 Select a character selection
panel using C/X/x/c, and press
. 2Select a character using
C/c, and press .