Sharp FO-2970M - Manual (Page 105)

Polling (Requesting a Fax Transmission)
103
7 S
pec
ia
l
Func
ti
ons
2
Press the RECEPTION MODE key
to set the reception mode to FAX.
3
Press these keys:
The display will show:
MEMORY POLL MODE
1=SET, 2=CLEAR
Being polled (Memory polling)
To let another fax machine poll your fax machine, you must first store
the document in memory using the following procedure. Transmission
will take place when the other fax machine calls your fax machine and
activates polling. You can choose whether to allow polling only once,
or an unlimited number of times. In the latter case, your fax machine
can be used as an electronic "bulletin board".
♦ Only one document can be stored at a time for memory polling.
♦ If you allow polling only once, the document will be automatically
cleared from memory after polling. If you allow polling an unlim-
ited number of times, the document will remain in memory until
you clear it as explained in the following section, Clearing a docu-
ment.
1
Load the document.
8
FUNCTION
FAX TEL
A.M.
RECEPTION
MODE
all-fo2970.book Page 103 Monday, July 24, 2000 7:45 AM