Sharp FO-2970M - Manual (Page 109)

Timer Operations
107
7. S
pec
ia
l
Func
ti
ons
Timer Operations
The Timer function allows you to set up a transmission or polling
operation to be performed automatically at a time you specify. Up to
three operations can be set at any one time, and the times they will be
performed can be specified up to one week in advance.
♦ You can use this function to take advantage of lower off-peak tele-
phone rates without having to be there when the operation is per-
formed.
Note: Only a Rapid Key or Speed Dial number can be used to dial the
receiving machine. Full numbers cannot be used.
Setting a timer operation
1
If this is a transmission, load the
document.
3
Press 1 to select SET.
4
Press 1 to set a transmission operation
(SEND MODE), or 2 to set a polling
operation (POLLING MODE).
or
SEND POLLING
1 2
1
2
Press these keys:
The display will show:
1
FUNCTION
TIMER MODE
1=SET, 2=CLEAR
all-fo2970.book Page 107 Monday, July 24, 2000 7:45 AM