Sharp FO-2970M User Manual

Page 24

Advertising
background image

Loading Printing Paper

22

6

Push the paper release lever back
down.

Note: If the paper does not feed

correctly, remove the entire stack
from the tray and repeat the loading
procedure from the beginning.

Important:
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.

4

Insert the stack of paper firmly into
the tray, print side up.

• Make sure that the stack is not

higher than the marked line.
Loading too much paper may cause
paper jams and misfeeds.

• If paper remains in the tray, take it

out and combine it into a single
stack with the new paper before
adding the new paper.

5

Make sure the stack of paper is
aligned against the right paper guide,
and then gently move the left paper
guide to the 8 1/2 position for letter or
legal paper, or the A4 position for A4
paper.

all-fo2970.book Page 22 Monday, July 24, 2000 7:45 AM

Advertising