Sharp FO-2970M - Manual (Page 61)

Sending a Fax by Automatic Dialing
59
2. Sendi
ng
Doc
u
ments
Speed Dialing
If the number you want to dial has been programmed in a Speed Dial
number, you can dial it by pressing the SPEED DIAL key and then
entering the Speed Dial number.
1
Load the document(s).
• SEND READY appears in the
display.
• Set the resolution and/or contrast if
desired.
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
• To enter numbers 1 through 9, first
enter 0 and then the number.
(Example)
3
Check the display. If the name or
number shown is correct, press the
START key. (If not, press the STOP
key and then repeat Step 2.)
SPEED
DIAL 0 9
START
RESOLUTION
all-fo2970.book Page 59 Monday, July 24, 2000 7:45 AM