Sharp FO-2970M User Manual

Page 62

Advertising
background image

Sending a Fax by Automatic Dialing

60

Direct Keypad Dialing

You can also enter a full number with the number keys and then press
the START key to begin dialing. You can use this method to dial a full
number when you don’t need to speak to the other party before faxing.

1

Load the document(s). (Note: If
desired, you can load the document
after dialing in Step 2, below.)

• SEND READY will appear in the

display.

• Set the resolution and/or contrast if

desired.

2

Enter the number of the receiving
machine by pressing the numeric
keys.

• If a pause is required between any

of the digits to access a special
service or an outside line, press the
REDIAL key (two seconds per
pause). The pause will appear as a
hyphen. Several pauses can be
entered in a row.

3

Check the display. If the number of
the receiving machine shown is
correct, press the START key.

• If it is not correct, press the STOP

key to backspace and clear one
digit at a time, and then re-enter the
correct digit(s).

(Example)

4

6

7

5

3

2

2

START

RESOLUTION

all-fo2970.book Page 60 Monday, July 24, 2000 7:45 AM

Advertising