Symbol Technologies DS6707 - Manual (Page 169)

Symbologies 10 - 23
Transmit Code 39 Check Digit
Parameter # 2Bh
Scan a bar code below to transmit Code 39 data with or without the check digit.
Code 39 Full ASCII Conversion
Parameter # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To
enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
Transmit Code 39 Check Digit (Enable)
(01h)
*
Do Not Transmit Code 39 Check Digit (Disable)
(00h)
NOTE
Code 39 Check Digit Verification must be enabled for this parameter to function.
Enable Code 39 Full ASCII
(01h)
*
Disable Code 39 Full ASCII
(00h)
NOTE
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the
ASCII Character Set Table for the appropriate interface. See the
ASCII Character Set for USB on
page 7-12 or the ASCII Character Set for RS-232 on page 8-19 .