Composite tlc-39, Upc composite mode, Composite tlc-39 -51 upc composite mode -51 – Symbol Technologies DS6707 User Manual
Page 197: Upc composite mode parameter # f0h 58h
Symbologies 10 - 51
Composite TLC-39
Parameter # F0h 73h
Scan a bar code below to enable or disable Composite bar codes of type TLC-39.
UPC Composite Mode
Parameter # F0h 58h
UPC symbols can be “linked” with a 2D symbol during transmission as if they were one symbol. There are
three options for these symbols:
•
Select UPC Never Linked to transmit UPC bar codes regardless of whether a 2D symbol is detected.
•
Select UPC Always Linked to transmit UPC bar codes and the 2D portion.
If 2D is not present, the UPC bar code does not transmit.
•
If Autodiscriminate UPC Composites is selected, the scanner determines if there is a 2D portion, then
transmits the UPC, as well as the 2D portion if present.
Enable TLC39
(01h)
*
Disable TLC39
(00h)
UPC Never Linked
(00h)
*
UPC Always Linked
(01h)
Autodiscriminate UPC Composites
(02h)