Rule 1: the code 128 scanning rule, Rule 2: the upc scanning rule, Alternate rule sets – Symbol Technologies DS6707 User Manual
Page 211
Advanced Data Formatting 11 - 3
Rule 1: The Code 128 Scanning Rule
Step
Bar Code
On Page
Beep Indication
1
Begin New Rule
High High
2
Code 128
High High
3
Send next 5 characters
High High
4
Send <CTRL M>
High High
5
Send next 5 characters
High High
6
Send <CTRL P>
High High
7
Send next 2 characters
High High
8
Send <CTRL D>
High High
9
Save Rule
High Low High Low
Rule 2: The UPC Scanning Rule
Step
Bar Code
On Page
Beep Indication
1
Begin New Rule
High High
2
UPC/EAN
High High
3
Send all remaining data
High High
4
Send <CTRL M>
High High
5
Save Rule
High Low High Low
To correct any errors made while entering this rule, scan the
Quit Entering Rules bar code on page 11-6
. If the
rule is already saved, scan the
Erase Previously Saved Rule bar code on page 11-6
Alternate Rule Sets
ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is
useful to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
The bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data is sent as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)