Symbol Technologies DS6707 - Manual (Page 234)

11 - 26 DS6707 Digital Imager Scanner Product Reference Guide
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 11-1 Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan the Move Cursor To Character on page 11-27 , then any
printable ASCII character from the Alphanumeric Keyboard beginning
on page 11-86 . When this is used, the cursor moves to the position
after the matching character. If the character is not there, the rule fails
and ADF tries the next rule.
11-27
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 11-27
Move Cursor Past a Character This parameter moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, then
the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past
Character on page 11-27 , then select a character from the
Alphanumeric Keyboard beginning on page 11-86 . If the character is
not there, the cursor does not move (i.e., has no effect).
11-27
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead
to move the cursor. 11-28
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back
to move the cursor. 11-29
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code.
These values must be set using the prefix/suffix values in
Table 8-4
on page 8-19 .
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
11-29