Led definitions, Scanning in hand-held mode, Scanning with the digital imager scanner – Symbol Technologies DS6707 User Manual

Page 30: Led definitions -4 scanning in hand-held mode -4, Scanning with the digital imager scanner -4

Advertising
background image

2 - 4

DS6707 Digital Imager Scanner Product Reference Guide

LED Definitions

In addition to beep sequences, the digital imager scanner uses a two-color LED to indicate status.

Table 2-2

defines LED colors that display during scanning.

Scanning in Hand-Held Mode

Install and program the digital imager scanner (see

Setting Up the Digital Imager Scanner on page 1-3

). For

assistance, contact the local supplier or the local

Symbol Global Interaction Center

.

Scanning with the Digital Imager Scanner

1.

Ensure all connections are secure (see the appropriate host chapter.)

2.

Aim the digital imager scanner at the bar code.

Figure 2-8

Scanning in Hand-Held Mode

3.

When the digital imager scanner senses movement, in its default Auto Aim trigger mode, it projects a red
laser aiming pattern (shown in

Figure 2-9

) which allows positioning the bar code or object within the field of

view. (To turn off the default Auto Aim trigger mode, see

Trigger Mode on page 4-8

.)

Figure 2-9

Laser Aiming Pattern

If necessary, the digital imager scanner turns on its red LEDs to illuminate the target bar code.

Table 2-2

Standard LED Definitions

LED

Indication

Off

No power is applied to the digital imager scanner, or the digital imager scanner is on
and ready to scan.

Green

A bar code was successfully decoded.

Red

A data transmission error or digital imager scanner malfunction occurred.

Advertising