Symbol Technologies DS6707 - Manual (Page 55)

User Preferences & Miscellaneous Digital Imager Scanner Options 4 - 13
Miscellaneous Scanner Parameters
Transmit Code ID Character
Parameter # 2Dh
A Code ID character identifies the code type of a scanned bar code. This is useful when the digital imager
scanner is decoding more than one code type. In addition to any single character prefix already selected, the
Code ID character is inserted between the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID
Characters, see
Symbol Code Identifiers on page B-1 and AIM Code Identifiers on page B-3 .
Prefix/Suffix Values
Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h
Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a
prefix or suffix, scan a four-digit number (i.e., four bar codes from
Appendix D, Numeric Bar Codes ) that
corresponds to that value. See Table E-1 on page E-1 for the four-digit codes.
When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit
decimal value. See
Table E-1 on page E-1 for the four-digit codes.
Symbol Code ID Character
(02h)
AIM Code ID Character
(01h)
*
None
(00h)