Symbol Technologies DS6707 - Manual (Page 81)

Imaging Preferences 5 - 21
Video View Finder
Parameter # F0h, 44h
Select Enable Video View Finder to project the video view finder while in Video Mode, or Disable Video View
Finder to turn the video view finder off.
Target Video Frame Size
Parameter # F0h, 48h
Select the number of 100-byte blocks to be transmitted per second. Selecting a smaller value allows more
frames to be transmitted per second but reduces video quality; selecting a larger value increases video quality
but slows transmission.
To set the Target Video Frame Size, scan the bar code below followed by two bar codes from Appendix D,
Numeric Bar Codes corresponding to the 100-byte value from 800 to 3300 bytes. For example, to select 1500
bytes, enter 1, 5. To select 900 bytes, enter 0, 9.
*
Disable Video View Finder
(00h)
Enable Video View Finder
(01h)
Target Video Frame Size