Samsung HT-DB660 - Manual (Page 9)

Connecting the Video to TV
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Composite
Video
Component
Video
S-Video
TV
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals. See page 17 to select Progressive Scan.
* Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.
Note
CONNECTIONS
Mounting the Speakers to a Wall
1 Attach the wall bracket holders (A) to the wall and fasten the holder
screws (B) as shown in the illustration.
• For an optimal sound field, the distance between the speakers should be 40 inches, and each
speaker should be at least 20 inches away from the side wall.
2
Check the left and right speakers, fasten the speaker to the bracket (C)
using the fixing screw (D), and then insert the bracket into the holder as
shown in the illustration. (Insert the speaker cords before inserting the
bracket into the holder.)
3
Complete the speaker setup as shown in the illustration.
16 15
B
A
T V
T V
D
C
Left Speaker Right Speaker
• If the wall is concrete, purchase and use anchor bolts.