Sentry Industries WIRELESS 2.1 SP900 - Manual (Page 4)

The FCC
Needs Y
ou to Know:
W
arning: Changes or modifications to this unit not expressly approved by the par
ty responsible for
compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to P
art
15 of the FCC R
ules. These limits are designed to provide reasonable protection
against harmful inter
ference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter
ference to radio communications. However
, there is no guarantee that inter
ference
will not occur in a par
ticular installation. If this equipment does cause harmful inter
ference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr
y to correct the inter
ference by one or more of the following measures:
• R
eorient or relocate the receiving antenna. • Move the transmitter to a different physical location. • Increase the separation between the equipment and receiver
.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. • If you cannot eliminate the inter
ference, the FCC requires that you stop
using your headphones.
This device complies with P
ar
t 15 of the FCC R
ules. Operation is subject to the following two
conditions: (1) this device may not cause harmful inter
ference, and (2) this device must accept any
inter
ference received, including inter
ference that may cause undesired operation.
1) P
ay attention to all the warnings that have been mentioned in this user
-manual!
2) Do not use this apparatus near water
.
3) Clean only with a dr
y cloth.
4) Do not block any ventilation openings.Install by referring to the manufacturer's
instructions.
5) Do not install near heat sources such as radiator
, heat registers,stoves or
other apparatus including amplifiers that produce heat.
6) Do not ignore the main purpose of a polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other
.A grounding-type plug has
two blades and a third grounding prong.The wider blade or the third prong are provided for your safety
. If the provided plug does not fit into your outlet,
consult an electrican for replacement of the obsolete outlet.
7) Do not walk on the power cord and do not pinch any plugs or
convenience receptacles(including the point at which they exit from the apparatus.)
8) Only use attachments and accessories specified by the manufacturer
.
9) Unplug the apparatus during thunder storms or when not in use for long periods of time. 10) R
efer all ser
vicing to qualified ser
vice personnel.Ser
vicing is required when
the apparatus has been damaged.The following are examples of when cer
tain situations
arise and it is necessar
y to contact a qualified personnel for ser
vicing.
-W
hen the power
-supply cord is damaged.
-Liquid has been spilled onto the apparatus. -Objects have fallen into the apparatus. -The apparatus has been exposed to rain or moisture. -The apparatus has been dropped.
Sentr
y war
rants this product to be free from defects in materials and workmanship for a ninety day
period from the date of original purchase. This war
ranty does not per
tain to damage resulting from
accident, abnor
mal use, misuse or neglect. Any defective product will be replaced if retur
ned to an
authorized Sentr
y dealer or to Sentr
y directly at: P
.O
. Box 885,
One Bridge St. Hillbur
n, NY 10931.
Please enclose your original sales receipt and a check for $10.00 for retur
n shipping & handling.
Limited Ninety
-Day W
arranty:
IMPORT
ANT SAFETY INSTRUCTIONS:
VISIT
US
ONLINE:WWW
.SENTR
YINDUSTRIES.COM
The FCC
Needs Y
ou to Know:
W
arning: Changes or modifications to this unit not expressly approved by the par
ty responsible for
compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to P
art
15 of the FCC R
ules. These limits are designed to provide reasonable protection
against harmful inter
ference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter
ference to radio communications. However
, there is no guarantee that inter
ference
will not occur in a par
ticular installation. If this equipment does cause harmful inter
ference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr
y to correct the inter
ference by one or more of the following measures:
• R
eorient or relocate the receiving antenna. • Move the transmitter to a different physical location. • Increase the separation between the equipment and receiver
.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. • If you cannot eliminate the inter
ference, the FCC requires that you stop
using your headphones.
This device complies with P
ar
t 15 of the FCC R
ules. Operation is subject to the following two
conditions: (1) this device may not cause harmful inter
ference, and (2) this device must accept any
inter
ference received, including inter
ference that may cause undesired operation.
1) P
ay attention to all the warnings that have been mentioned in this user
-manual!
2) Do not use this apparatus near water
.
3) Clean only with a dr
y cloth.
4) Do not block any ventilation openings.Install by referring to the manufacturer's
instructions.
5) Do not install near heat sources such as radiator
, heat registers,stoves or
other apparatus including amplifiers that produce heat.
6) Do not ignore the main purpose of a polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other
.A grounding-type plug has
two blades and a third grounding prong.The wider blade or the third prong are provided for your safety
. If the provided plug does not fit into your outlet,
consult an electrican for replacement of the obsolete outlet.
7) Do not walk on the power cord and do not pinch any plugs or
convenience receptacles(including the point at which they exit from the apparatus.)
8) Only use attachments and accessories specified by the manufacturer
.
9) Unplug the apparatus during thunder storms or when not in use for long periods of time. 10) R
efer all ser
vicing to qualified ser
vice personnel.Ser
vicing is required when
the apparatus has been damaged.The following are examples of when cer
tain situations
arise and it is necessar
y to contact a qualified personnel for ser
vicing.
-When the power
-supply cord is damaged.
-Liquid has been spilled onto the apparatus. -Objects have fallen into the apparatus. -The apparatus has been exposed to rain or moisture. -The apparatus has been dropped.
Sentr
y war
rants this product to be free from defects in materials and workmanship for a ninety day
period from the date of original purchase. This war
ranty does not per
tain to damage resulting from
accident, abnor
mal use, misuse or neglect. Any defective product will be replaced if retur
ned to an
authorized Sentr
y dealer or to Sentr
y directly at: P
.O
. Box 885,
One Bridge St. Hillbur
n, NY 10931.
Please enclose your original sales receipt and a check for $10.00 for retur
n shipping & handling.
Limited Ninety
-Day W
arranty:
IMPORT
ANT SAFETY INSTRUCTIONS:
VISIT
US
ONLINE:WWW
.SENTR
YINDUSTRIES.COM