Sony CMT-CP300 - Manual (Page 10)

10
To
Cancel Program Play
Add a track to the end
of the program
Erase the entire
program
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD u (or N on
the remote).
• “--.--” appears in the display when the total program
time exceeds 100 minutes, or when you select a
track whose number is 21 or over.
Using the CD display
Press DISPLAY on the remote repeatedly.
When a CD TEXT disc is loaded, you can
check the information recorded on the disc,
such as the titles.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track
t Current track number and
remaining playing time of the track t
Remaining playing time of the current CD t
Track title of the current track* t Clock
display t Current track number and elapsed
playing time of the track t ......
While the CD is stopped
Total number of tracks and total playing time
of the current CD
t Disc title* t Clock
display t Total number of tracks and total
playing time of the current CD t ......
* If a CD that has no title is loaded, nothing appears.
When the CD contains 21 tracks or more, CD
TEXT is not displayed for each track starting with
the 21st.
Note
When the 1 DISC indicator goes off, the remaining
playing time of the current disc will appears as “--.--”.
Programming the CD tracks
(continued)
Do this
Press PLAY MODE
repeatedly until “PGM”
disappears from the display.
Do steps 3 through 5 with
Program Play stopped.
Press CD x with Program
Play stopped.