Sony CMT-CP300 - Manual (Page 13)

13
Tape
Tape
Loading a tape
1
Press DECK A (or B) EJECT Z .
2
Load a recorded/recordable tape into
the cassette holder A* (or B).
Y
?/1
x N x
m M m M X
z
* Playback only
Playing a tape
You can use Type I (normal) tape.
1
Load a recorded tape into the cassette
holder A (or B).
2
Turn FUNCTION (or press FUNCTION
on the remote repeatedly) until
“TAPE A” (or “TAPE B”) appears in the
display.
The indicator surrounding the TAPE A N
(or B Y) and TAPE A (or B) x buttons
lights up.
To switch to the other deck, press
TAPE A/B on the remote.
3
Press DIRECTION on the remote
repeatedly to select “
” to play one
side of the tape or “ ”* to play both
sides repeatedly (up to five times).
To play both tapes in consecutive order,
select “R” (Relay)**.
* Deck A does not play the reverse side.
** The front side of the tape in deck A plays
once, and then both sides of the tape in deck B
play repeatedly (up to five times).
4
Press TAPE A N (or B Y ) (or N on
the remote).
Press TAPE B Y (or N on the remote)
again to play the reverse side of the tape in
deck B. The tape starts playing back.
With the side you want to play/
record on facing towards you
Other Operations
To
Stop playback
Pause*
Fast-forward or
rewind
Remove a tape**
* On deck B only
** Do not press DECK A (or B) EJECT Z while the
tape is moving.
Do this
Press TAPE A (or B) x.
Press TAPE X. Press again to
resume playback.
With the tape stopped, press
TAPE A (or B) m/M.
Press DECK A (or B) EJECT
Z.