Using optional audio components, Using the digital media port adapter, Using optional audio – Sony CMT-HX80 User Manual
Page 21: Components using the digital media port, Adapter
CMT-HX80R.GB.3-452-364-11(1)
1
GB
Basic Oper
ations
Using optional audio
components
1
Connect additional audio
component to the AUDIO
IN jack
on the unit using
an audio analog cord (not
supplied).
2
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
.
3
Select the AUDIO IN function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
4
Start playing the connected
component.
5
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
Using the DIGITAL
MEDIA PORT adapter
1
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select “DMPORT.”
2
Start playing the connected
component.
The sound from the connected
component is played on the system.
For operation details, see the
operating instructions of the
DIGITAL MEDIA PORT adapter.
Note
Depending on the type of DIGITAL MEDIA
PORT adapter, you may be able to operate the
connected component using either the buttons
on the remote or the unit.
Tip
You can use the system as a battery charger for
the audio device connected to the DIGITAL
MEDIA PORT adapter while the system is on.