Trigger mode, Trigger mode -8, Trigger mode parameter # 8ah – Symbol Technologies 72E-86039-04 User Manual

Page 50

Advertising
background image

4 - 8

Symbol DS6708 Digital Scanner Product Reference Guide

Trigger Mode

Parameter # 8Ah

Select one of the following trigger modes for the digital scanner:

Level - A trigger pull activates decode processing. Decode processing continues until the bar code decodes,
you release the trigger, or the Decode Session Timeout occurs.

Blink - This trigger mode is used in presentation (scanstand) mode. The digital scanner activates decode
processing when it detects a bar code in its field of view. Decoding range is reduced in this mode.

Auto Aim - This trigger mode turns on the red laser aiming pattern when the digital scanner senses motion.
A trigger pull activates decode processing. After 2 seconds of inactivity the red laser aiming pattern
automatically shuts off.

Level

(00h)

Blink
(07h)

*

Auto Aim

(09h)

Advertising