Scan save – Sharp AR-M700N User Manual
SAVING A DOCUMENT IMAGE FILE
Scan save is used to save a scanned document image in the main folder or the custom folder without copying or transmitting it.
Press the [DOCUMENT FILING] key on the
Touch the [SCAN TO HDD] key.
Touch the [SPECIAL MODES] key.
Select any special
functions that you wish
to use (otherwise skip
When the [SPECIAL
MODES] key is touched,
the special modes
Touch the [FILE INFORMATION] key.
The screens for selecting the user name, file
name, folder, and attribute appear. Configure
the settings as explained in step 3 to step 15 on
pages 7-7 to 7-8. When step 15 is completed, you
will return to the main screen of document filing.
Perform any of the following steps 7 to 16
as needed. When finished, go to step 17 on
●To set the original size, perform steps 7 to 10.
●To set the resolution, perform steps 11 to 13
on page 7-11.
●To select the exposure, perform steps 14 to
16 on page 7-11.
●If you no not wish to select any of the above
settings, go to step 17 on page 7-11.
Touch the [ORIGINAL] key.
If the original is two-sided, touch the [2-
SIDED BOOKLET] key or the [2-SIDED
TABLET] key depending on where the
pages are bound.
Touch the [OK] key.
You will return to the
screen of step 5.
Scan save can only be used if the machine has the printer function.
For explanations of the special functions, see page
7-12 and chapter 5.
SCAN TO HDD
SCAN TO HDD
If the original pages are bound at the side, the
document is a "booklet". If the original pages are
bound at the top, the document is a "tablet".