SRS Labs Plasma Display Panel Television - Manual (Page 14)

English - 14
Channel names will be assigned automatically when channel information is
broadcast. These names can be changed, allowing you to assign new names.
1 Press the MENU ( ) button to display the menu.
2 Press the … or † button to select Channel, then press the ENTER/OK ( )
button.
3 Press the … or † button to select Name, then press the ENTER/OK ( )
button.
4 Press the … or † button to select the channel to be assigned to a new name,
then press the ENTER/OK (
) button.
5 Press the … or † button to select a letter (A~Z), a number (0~9), or a symbol.
Move on to the previous or next letter by pressing the œ or √ button, then
press the ENTER/OK (
) button.
6 Repeat steps 4 to 5 for each channel to be assigned to a new name.
7 Press the EXIT button to exit.
Assigning Names to Channels
Name
Move Adjust Return
Prog. Ch. Name
0 C -- -----
1 C 4 -----
2 C 74 -----
3 C 75 -----
4 S 1 -----
TV
A
➢
Not available in DTV or external input mode.
This operation allows you to change the programme numbers of stored channels.
This operation may be necessary after using auto store.
1 Press the MENU ( ) button to display the menu.
2 Press the … or † button to select Channel, then press the ENTER/OK ( )
button.
3 Press the … or † button to select Sort, then press the ENTER/OK ( )
button.
4 Select the channel that you wish to move by pressing the … or † button, then
press the ENTER/OK (
) button.
5 Select the number of the programme to which the channel is to be moved by
pressing the … or † button.
Press the ENTER/OK (
) button. The channel is moved to its new position
and all other channels are shifted accordingly.
6 Repeat steps 4 to 5 until you have moved all the channels to the required
programme numbers.
7 Press the EXIT button to exit.
Sorting the Stored Channels
Sort
Move Enter Return
Prog. Ch. Name
0 C --
1 C 4
2 C 74
3 C 75
4 S 1
TV
➢
Not available in DTV or external input mode.
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 14