SRS Labs Plasma Display Panel Television - Manual (Page 19)

English - 19
1 Press the MENU ( ) button to display the menu.
2 Press the … or † button to select Setup, then press the ENTER/OK ( )
button.
3 Press the … or † button to select Time, then press the ENTER/OK ( )
button.
4 Select the required option by pressing the … or † button, then press the
ENTER/OK (
) button.
Available options: Clock Set, Sleep Timer, On Timer, Off Timer
5 When you are satisfied with your setting, press the ENTER/OK ( ) button.
6 Press the EXIT button to exit.
◆ Clock Set
You can set the television clock so that the current time is displayed when pressing the INFO ( ) button on the
remote control. You must also set the time if you wish to use the automatic on or off timers.
- Press the œ or √ button to select Hour or Minute.
Set these by pressing the … or † button.
➢
You can set the hour and minute directly by pressing the numeric buttons on the remote control.
➢
In the event of a power interruption or the set being turned off at the supply, the settings for the Clock will
be lost.
◆ Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television automatically switches
to standby mode.
- Select the preset time interval (Off, 30, 60, 90, 120, 150, or 180) for staying on by pressing the … or †
button.
➢
If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the
television switches to standby mode is displayed.
◆ On Timer / Off Timer
You can set the On/Off timers so that the television will switch on or off automatically at the time you select.
☛
You must set the clock first.
- On Timer:
Select Hour, Minute, Programme, or Volume by pressing the œ or √ button.
Set these by pressing the … or † button.
To activate On Timer with the setting satisfied, set Activation to Yes by … or † button.
➢
You can set the hour and minute directly by pressing the numeric buttons on the
remote control.
- Off Timer: Select Hour or Minute by pressing the œ or √ button.
Set these by pressing the … or † button.
To activate Off Timer with the setting satisfied, set Activation to Yes by … or † button.
➢
You can set the hour and minute directly by pressing the numeric buttons on the
remote control.
☛
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in timer “On” mode and prevents overheating, which may
occur if a TV is on for too long time.
Time Features
Time
Move Enter Return
Clock Set 00 : 00
Sleep Timer
: Off
On Timer 00 : 00 Off
Off Timer 00 : 00 Off
TV
n.
lity.
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 19