SRS Labs Plasma Display Panel Television - Manual (Page 25)

English - 25
Basic Functions
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first. After the television channels
have been programmed, you will see the following picture (banner) each time
you switch channels:
Detailed program information
First you will see the banner described above.After pressing the INFO button
for the second time you will receive detailed program information for current
program can be displayed on another banner, if there is more information.
When this information is more than one page, P
/ can be used for page
up and down.
➢
This service depends on service provider.
2. Volume Control
To control the volume level:
• Press the +
- buttons to adjust the volume level.
• Press the MUTE button to turn to silence mode.
• Press the MUTE button again or +
- buttons in order to cancel the
mute function.
3. Select Soundtrack
• Press the ALT button to see the soundtrack list.
• Press the … or † and ENTER/OK (
) buttons to select one.
4. Select Videotrack
• Press the ALT button twice to see the videotrack list.
• Press the … or † and ENTER/OK (
) buttons to select one.
5. Service List
• Press the CH MGR button while you are viewing a program.
• Select list by pressing the TV/RADIO button.
The icon behind the channel name symbolizes scrambled channel,
and the icon behind the channel name symbolizes parental locked
channel.
• Select the channel by pressing the … or † and press the P / for
moving up or down pages on the lists.
• Press the ENTER/OK ( ) button to watch that channel.
continued...
ol.
Channel Number
Signal Status Program Information
The number of soundtrack
in current channel
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 25