Disk manage, Disk management – Samsung SHR-1041 User Manual
Page 39
English
_
●
settings
disk manage
You can confi gure the settings of disK manage related to the HDD.
Using the mouse may help easier selection of related items.
You must press the [
RETURN] button for the item selected using the <
CAM1
CAM1
CAM1
> buttons before you can move to a
different menu item.
In Live screen, right-click any area or press the [menu] button on the front panel or the remote control.
Use the up/down buttons ($%/ENTER) to select <system setup>.
You will see the "Login" dialog.
disK management
In the <system setup> window, use the left/right
buttons ($%_+/ENTER) to select <disK manage>.
Use the direction buttons ($%/ENTER) to select and set a
desired item.
overwrite
- If set to <on>, recording will proceed by overwriting the
existing data even if the size of the recording data
exceeds the HDD capacity.
- If set to <oFF> and the HDD is full, the DVR stops
recording and sounds the buzzer or alarm that is set to
operate in <event/sensor>. (Page 36)
A message of "disK FuLL" is displayed on the screen.
Format : Format the hard disk drive. All existing data will be lost.
Select <start>.
Enter the password in the "Login" dialog.
In the "Format" confi rmation window, select <yes>.
When done, select <oK> if you see a message of "you must restart this system" on the screen.
Note that formatting the HDD will delete all existing data.
When your settings are completed, click <appLy>.
You will see the system reboot dialog.
M
1.
.
.
.
•
•
J
.
CAM1
CAM1
CAM1
CAM1
DISK MANAGEMENT
DISK
MANAGEMENT
APPLY
UNDO
ON
START
OVERWRITE
FORMAT
02235A_SHR-1041K_ENG.indb 39
2009-02-17 오전 10:51:07