Using the remote control, Useful features – Sharp VIEWCAM VL-A10H User Manual
V L - A 1 0 H / p p . 0 2 4 - 0 3 7 ; 0 0 / 2 / 2 / 1 8 : 0 0
G. K . A s s o c i a t e s , To k y o
Using the Remote Control
Use the remote control to operate the VIEW-
CAM from a distance, such as when you want
to record yourself in a scene, or when the
VIEWCAM is connected to a TV for use as a
Installing the Batteries in the Remote
Open the battery compartment cover.
Insert the two supplied AA (R6 or UM/
SUM-3) batteries with the battery poles
positioned as indicated.
Replace the cover.
• Do not use old and new batteries together or
batteries of different brands together.
Turning On the Remote Control Mode
Press the MENU button until
ĭ or İ button (Q) to select
“REMOTE”, then press the SET button
B) (W) to select “ON” .
Press the DISPLAY button to turn off the
Operating the Remote Control
Aim the remote control at the remote sensor of
the VIEWCAM, and press the control buttons for
RECord START/STOP button
REWind/Reverse Search button
Forward Search button
Power Zoom Telephoto/
Wide angle control
range of remote control
• Be careful not to allow direct sunlight or bright
light from interior illumination to fall onto the
VIEWCAM remote sensor, as this may prevent
the remote control from operating properly.
• Be sure that there are no obstacles between the
remote control and the VIEWCAM remote sensor.
• The remote control cannot be used to move the
pointer, or select or set any of the various
functions on the monitor.
• When the batteries are depleted and the remote
control does not operate, replace them with new
AA (R6 or UM/SUM-3) batteries.
• You can also turn on the Remote Control mode
(MENU 1) screen in Camera mode.
S E T
P I C -
S E T
ED I T