Samsung HT-P40 - Manual (Page 10)

ENG
18 17
CONNECTIONS
Press AUX on the remote control to select AUX 1
or AUX 2 input.
•
Each time the button is pressed, the selection changes as
follows:
DIGITAL IN➝ AUX 1 ➝ AUX 2 .
• You can also use the FUNCTION button on the main unit.
The mode switches as follows:
DVD/CD ➝ DIGITAL IN
➝ AUX 1 ➝ AUX 2 ➝ FM ➝ AM .
• If you have connected an external digital
component and an Analog component to
Video In (1, 2) at the same time, there
will be video from AUX 1 even when you
select DIGITAL IN.
• If you have connected Audio In (L, R) to
1, connect Video In to 1. If you have
connected Audio In (L, R) to 2, connect
Video In to 2.
• When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
Connect Audio In on the Home Theater to Audio
Out on the external analog component.
•
Be sure to match connector colors.
Connect Video Out on the Home Theater to
Video In on your TV.
1
Connect Video In on the Home Theater to
Video Out on the external analog component.
2
3
4
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Video Cable
Audio Cable
If the external analog
component has only
one Audio Out,
connect either left or
right.
Press AUX on the remote control to select ‘DIGITAL IN’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2 .
• You can also use the FUNCTION button on the main unit.
The mode switches as follows:
DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ FM ➝ AM .
Connect Video Out on the Home Theater to Video In on the TV.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3
4
Example: Digital signal components such as a Settop Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not supplied)
External Digital
Component
External Analog
Component
Note
Connecting External Components
Connect Video In on the Home Theater to Video Out on the external digital component.
2