Konica Minolta bizhub 163 - Manual (Page 128)

Control panel operations for printing functions 5
IC-206 5-1
5 Control panel operations for printing
functions
Descriptions on the printing operations that can be performed from the con-
trol panel of the machine are provided below.
5.1 Printing operations
The default mode of the machine is the Copy mode. Normally, when printing
is performed from a connected computer, printing begins automatically.
For details, refer to “Starting the print operation” on page 5-2.
To print with “Bypass” selected in the “Paper Source” list on the Setup tab,
refer to “Using the manual bypass tray” on page 5-6.
Printer indicator
The “Printer” indicator shows the status of the printer data sent from the
computer.
Printer indicator Printing status
Flashing • The machine is receiving print data. The indicator also flashes in
other modes.
• An error has occurred in the machine.
Lit • Print data is being printed. Instead of flashing, the indicator re-
mains lit when data is being received during printing.
Off • There is no print data in the machine’s memory.