Konica Minolta bizhub 163 - Manual (Page 180)

Network settings 7
IC-206 7-41
Specifying the LDAP search timeout
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
TIMEOUT” is selected, and then press the [OK] key.
2
Type in the length of time (in seconds) until the LDAP search times out.
– The timeout period can be set between 5 and 300 seconds.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
Specifying the maximum number of search items
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “MAX.
SEARCH RESULTS” is selected, and then press the [OK] key.