Konica Minolta bizhub 163 - Manual (Page 186)

Network settings 7
IC-206 7-47
3
Type in the administrator access code, and then press the [OK] key.
– The manufacturer’s default setting is “000000”.
– If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until “USER SETTING” is selected, and then
press the [OK] key.
5
In the “USER SETTING” menu, press the [,] or [+] key until “NTP
SERVER ADDRESS” is selected, and then press the [OK] key.
6
Use the keypad to type in the NTP server address, and then press the
[OK] key.