Konica Minolta bizhub 163 User Manual
Page 198
Advertising
Registering destinations
8
IC-206
8-9
3
Press the [,] or [+] key until “SPEED DIAL” is selected, and then press
the [OK] key.
4
Type in the speed dial number to be programmed, and then press [OK]
key.
–
Speed dial numbers 001 through 240 can be programmed from the
control panel.
The speed dial number to be programmed appears, and then the
screen for registering settings appears.
5
Select “MANUAL SETTING” or “LDAP SEARCH”, and then press the
[OK] key.
–
If “MANUAL SETTING” was selected, continue with step 6.
–
If “LDAP SEARCH” was selected, continue with step 9.
Advertising
This manual is related to the following products: