Konica Minolta bizhub 163 - Manual (Page 73)

3 Network printing
3-8 IC-206
NetWare server/client (except NDPS)
1
Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2
Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to “Connecting the computer and this machine
over a network” on page 3-15.)
3
Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to “Connecting the computer and this
machine over a network” on page 3-15.)
NetWare server/client (NDPS)
1
Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2
From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to “Specifying an IP address” on page 3-9.)
3
Print the settings information, and then check the settings. (Refer to
“Printing the settings information” on page 3-13.)
4
Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to “Connecting the computer and this machine
over a network” on page 3-15.)
5
Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to “Connecting the computer and this
machine over a network” on page 3-15.)