Konica Minolta bizhub 163 User Manual

Page 88

Advertising
background image

Network printing

3

IC-206

3-23

After changing the settings for parameters marked with an asterisk (*), turn
this machine off, then on again.

Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS)
settings

2

Reminder

Before specifying NDS settings, make sure that NDPS Broker and NDPS
Manager have been created and loaded.

Check that the NetWare server is set to use the TCP/IP protocol.
Specify the IP address for the controller and check that it has started.

Parameter

NDS

Bindery

NetWare Configuration*

Enable NetWare (Select the check box to enable it.)

Frame Type*

AutoDetect (Select the frame type according to the network en-
vironment.)

Print Server Name

Print server name created in step 4

NDS Context Name

Name of the context that con-
nects to PServer

Not necessary to specify

Print Server Password

Specify only when setting from the NetWare Server.

Password Retype

Specify only when setting from the NetWare Server.

Preferred File Server

Not necessary to specify

Name of the file server that
connects to PServer

Preferred NDS Tree

Name of the tree where Pserv-
er logs on

Not necessary to specify

Print Queue Scan Rate*

1 (Change as necessary.)

Mode*

Nprinter

Printer Number

1 (Change according to the setting.)

Connection Mode

Directory Services

Bindry

Advertising
This manual is related to the following products: