Samsung SCH-N150 - Manual (Page 42)

42
Calls
Outgoing
To place a call press
to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you wish to call (up to 32 digits), by pressing
the numeric keys. The phone numbers display from left to right.
2. Press to place a call to the entered phone number.
• A record of the last 10 calls made is stored to the “Outgoing” call log list.
Incoming
Your phone signals an incoming call or message in the following ways:
• The backlight illuminates.
• The red LED indicator flashes.
• The ringer sounds (unless you have set the ringer to vibrate or off.)
Incoming call notification continues until one of the following events occurs:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Your phone provides the following voice call notification features.
• Eleven ring volume settings including vibrate or off.
• Five ring types, and fifteen melody tones (see “Ringer type” on page 75).
• Name display with Caller ID. (If the caller’s name is programmed into
your Phone Book.)
• Automatic storage of an incoming call’s information to a call log. (The
last 10 calls you answered are stored in an “Incoming” call log list and
the last 10 calls you missed are stored in a “Missed” call log list).