Kenwood DPC-X937 - Manual (Page 31)

31
DEUTSCH
IT
ALIANO
ESP
AÑOL
Alarm mode
(only by remote control operation)
An alarm tone can be generated in the set period of time after the alarm mode is set. The alarm mode is particularly
convenient to give yourself notice, for example approach of the destination station when your are on a train. Press
during playback or stop status.
1
Press the MENU key repeatedly until " " is displayed.
2
Press the 4 or 3/ ¢ key to set the time period.
÷ The time period can be set in the range from 1 min. to
120 min.
÷ Pressing the 3/¢ increases the time period and press-
ing the 4 key decreases it.
÷ When the alarm mode is set, " " is displayed on the
remote control.
The alarm mode cannot be used simultaneously
with the sleep mode. If the sleep mode is set
(page 33), cancel it before setting the alarm mode.
Continu ed on next page \
After setting the alarm function, press the MENU key
and select Exit from menu control. (page 25)
*5378_25_38EN 03.7.3, 2:19 PM 31